Original WEINIG Torque Wrench

Original WEINIG Grease Guns

Original WEINIG Hand Lever Grease Gun
For central lubrication of the entire machine. With pressure control valve 175 bar

Original WEINIG Table Lubricant Pumps
The manual table lubricant pump creates an oil film on the machine table. As a result the pieces of wood are more easily transported through the machine.

Lateral Pressure Rollers
The lateral pressure roller in front of the machine feed guarantees during the manual feed of the moulder that the work pieces have proper side pressure before they get below the first feed roller.

Original WEINIG Meter Counter
Linear meter counters from below, available in both mechanical and electrical.

Original WEINIG Manometer
Replacement manometer for WEINIG Hydro Grease Guns

Original WEINIG Table Rollers

Original WEINIG Jointing Stones
The original WEINIG jointing systems brings all the knives in the planer head to the same cutting circle diameter. This ensures a very high surface quality even under high feed speeds.

Original WEINIG Transport Rollers
These are available in various designs depending on the type of use.

Reduced roller distance
Additional feed rollers in the area of the vertical and universal spindles guarantee the transport of very short work pieces. Ensures continuous feed without sticking or burning.

Original WEINIG Telescopic Feed Roller
Telescopic feed roller opposite the left spindle. Fast and continuously adjustable from narrow to wide work pieces. A fast change of the compensator axle for large working widths is possible.

Original WEINIG Profile Pressure Shoes
for optimum guidance of difficult mouldings in the planer.

Lubricants / Cleaning materials / Coolants

Pressure Roller from Above
Prevents work pieces from lifting off the machine table. They can be located in many positions in practically every planer/moulder. The pressure rollers are available in pneumatic as well as in spring design.

Original WEINIG Waxilit
To remove resin from the machine table and improve the feed. Especially for the requirements of your WEINIG machine.

Original WEINIG Buffer Batteries
We recommend replacing the buffer battery every year in order to avoid a loss of data.

Original WEINIG Additional Lights for Better Visibility in the Planer
A fully electronic ballast avoids the strotoscopic (standstill) effect. With the traditional fluorescent lamps a rotating tool cannot be recognized and this often results in accidents.

Original WEINIG Setting Stand for Pressure Shoes
Setting stand for presetting the cassette system by means of wood samples or reverse profile-templates.

Original WEINIG Grease Cartridge
High performance industry grease for all hydro tensioning systems as well as all kinds of lubrications. Particularly when it is a matter of longevity, precision and rust protection.

Original WEINIG Hydro Grease Gun
When you use the WEINIG Hydromat you absolutely need the WEINIG Hydro Grease Gun to tension your Hydro Tools and counterbearings.

Original WEINIG Table Board / Contact Pressure with Wood Insert
During sawing work you also demand highest precision of the work pieces.

Original WEINIG Quick Action Lock Nut
Fast tool change. Exact axial tension 30 KN. Positive tensioning action.

Original WEINIG Adjustment Ruler
for mechanically adjusting tools to machine tables and stop.

Original WEINIG Feed Rollers
are available in various designs depending on the type of use.

Original WEINIG Spindle Combination Wrench
So that you are able to easily fasten and unfasten the spindle nut with one grip.

Original WEINIG Drive Belts
Original WEINIG belts are endless, i.e. produced without any connecting splice.

Original WEINIG Crank Extension
to push onto the crank handle to guarantee undisturbed turning.

Original WEINIG Cassette Exchange System
The jointing stone cassettes are interchangeable.

Original WEINIG Jointing Stones
The original WEINIG jointing system brings all the knives in the planer head to the same cutting circle diameter.