Cut optimization – Step-by-step instructions for effective panel cutting

With the professional OptiBase V-Cut cutting optimization feature from HOLZ-HER, you always get the best optimization result thanks to perfect material utilization. Clearly arranged user surface and 10” touch screen for simple, quick operation and management of orders, material and parts lists. The label printer for HOLZ-HER machines, which is included in the package, ensures clear identification of parts.

The way to support cutting optimization

• The optimization software for vertical panel cutting saws means you can optimize your cutting plans effortlessly.
• Waste material is significantly reduced and professionally managed through labeling.
• The choice is yours – you can either import the cutting plans created in your office via network connection / USB or enter them directly on the touch screen.
• Perfect material utilization and maximum yield thanks to intelligent software.

Your benefits

• Importing parts lists from various branch programs (Cabinet Control, Imos, OSD, CSV interface, etc.)
• Writing parts lists in the office incl. Edging / Coverings / Oversize dimensions / Production sequence / etc.
• Printing labels with all known information such as: Data matrix / Com. / Dimensions / Edgings / Coverings / etc.
• Fast handling at machine, because optimization can be accomplished previously in the office and the monitor shows all data and work steps
• Remnants are managed and booked (remnant store also completely active)
• Programmable remnant store for panels and coverings
• Network connectivity (machine can be integrated into network so that all remnants are also known in the office and optimized results can be displayed directly on machine.)
• Plug to Play

SuperCut is the patented HOLZ-HER prescoring system. It provides ready-to-glue cuts with just one basic adjustment.

• Two carbide blades score the surface of coated panels exactly to the width of the saw blade.
• The circular saw blade then cuts the panel without chipping the hard, brittle or fibrous top layer.
• The result is a smooth edge for further processing.
• SuperCut can be adjusted easily on a dimension scale.
• SuperCut can be retrofitted at any time on all SECTOR panel saws.

Top and bottom sawing beams with pneumatic arrest, can be operated from the control panel at the touch of a button. Including automatic interface detection for vertical cut.

Sawing unit including pneumatic arrest for horizontal cut and electrical fine adjustment of measurement directly on the control panel.

The sawing unit is equipped with a pneumatic brake as a standard feature. 

The dimension for the horizontal cut can be precisely adjusted to an accuracy of 1/10 mm at the touch of a button with the adjustment motor included as a standard feature. As an alternative the setting can also be read off on the setting scale.

Digital dimension display for vertical cut, including fine adjustment of hardened linear guide (optional).

The mobile angular cutting device allows angular cuts up to 45° to be completed easily. For this purpose simply clamp the angular cutting device to the saw and set the angle in degrees. Two adjustable vacuum units hold the panel in place. Then cutting can be accomplished in the vertical or horizontal direction. A simple conversion feature allows the angular cutting unit to be attached on the left or right side of the cut.

The strip stop ensures a uniform cut to the width of the workpiece. Once set - every cut is the same

In house production of frames for vertical panel saws.

Up to 2200 tons of steel and aluminum are used in HOLZ-HER's own frame construction. A laser cutting unit with fully automatic charging optimizes cutting steel plates with thicknesses up to 25 mm. This ensures that HOLZ-HER can use the ideal material thickness for all construction parts where rigidity is relevant.

With a nominal pressing force of 400 tons, multiple hydraulic trimming presses ensure perfect component shape with automatic material thickness measurement and pressure control.

The individual parts are welded together very carefully. Optimally designed welding equipment ensures high quality consistency for your machine.

The completely welded frames are milled with high precision on a number of long-bed cutting machines. This ensures that all surfaces are optimally prepared for later attachment of guides and equipment.